Before road the EEC low-speed electric vehicle, check whether various lights, meters, horns and indicators are working properly; check the indication of the electricity meter, whether the battery power is sufficient; check whether there is water on the surface of the controller and motor, and whether the mounting bolts are loose , Whether there is a short circuit; check whether the tire pressure meets the driving needs; check whether the steering system is normal and flexible; check whether the braking system is normal.
Start: Insert the key into the power switch, make the rocker switch in the neutral state, turn the key to the right, turn on the power, adjust the steering, and press the electric horn. Drivers should hold the steering handle tightly, keep their eyes straight ahead, and not look left or right to avoid distraction. Turn on the rocker switch to the forward state, slowly turn the speed control handle, and the electric vehicle starts smoothly.
Driving: During the driving process of EEC low-speed electric vehicles, the speed of the vehicle should be controlled according to the actual conditions of the road surface. If it is burnt, drive at a low speed on uneven roads, and hold the steering handle tightly with both hands to prevent the violent vibration of the steering handle from hurting your fingers or wrists.
Steering: When EEC low-speed electric vehicles are driving on general roads, hold the steering handle firmly with both hands. When turning, pull the steering handle with one hand and assist the push with the other hand. When turning, slow down, whistle, and drive slowly, and the maximum speed shall not exceed 20km/h .
Parking: When the EEC low-speed electric vehicle is parked, release the speed control handle, and then slowly step on the brake pedal. After the vehicle stops steadily, adjust the rocker switch to the neutral state, and pull up the handbrake to complete the parking.
Reversing: Before reversing, the EEC low-speed electric vehicle must first stop the whole vehicle, put the rocker switch in the reversing position, and then slowly turn the speed control handle to realize reversing.
Post time: Sep-14-2022